So 4 cell is a little over spec for this motor. Log In to reply. Thanks for the comment, that helped clarify things. I forgot to say that I’ll be running them on a 4S Sorry guys, pls respond now. About a 4 minute flight. Failing that, use 8×4. Dont worry, the motors are great motors, Try it and see how you go, but I am predicting that you will need to swap the props to 8×4.
MaxPower on July 25, Electric Motor Design and Construction. So 4 cell is a little over spec for this motor. Apr 09, No, I don’t want to lift any car. Question How are NTM prop drive motors? Posting Quick Reply – Please Wait.
Which one is better, kv or the kv variant? Apr 09, Hope this helped clear up some of your confusions about the numbers. The reason your pulling so many amps is those slow fly props your using.
I have onboard video from the flight.
Review of NTM Prop Drive A kv Motor and Thrust Test
Apr 11, Nov 29, Flew WOT untill the speed controler cut out. I have been using these motors on a few multirotor builds and so far they have been working great, I have flights and so far they are still quiet and running smooth.
Sign up now to remove ads between posts. For their size and pitch they always pull more amps than say and apc or other styled electric props. MaxPower on July 25, Log In to reply. I thrust tested the motors on the bench with both 3S and 3S Lipos, with a 8″x4. Recommend This Article You need to log-in to rate articles. I run an 8×6 apc on that motor on 4s, and it only pulls 16ish amps I want to say using the same meter as you. Something I noticed about the motor specs you were looking at, HobbyKing used “E” props instead of Slow Fly props like you did, so that may have impacted your numbers.
I realized after crive that I am pushing the motors a bit over spec when running on 4S. I ordered NTM kv and props. I’ll upload it eventually.
I forgot to say that I’ll be running them on a 4S Sorry guys, pls respond now.
NTM Prop Drive A Series kv w
Jul 18, About a 4 minute flight. No, I don’t want to lift any car. I paired them with 20A ESCs flashed with simonk, 10″x4. I’ll be using a 4S Thanks, 82-26a.
It does need a high C battery, C 3S mAh. I’ve asked this question in some other threads after hijacking ddrive, but I got entirely contrasting replies. Jul 15, Originally Posted by Noob Mike.
Failing that, use 8×4. Sad Sack What’s a servo? I broke it down into three parts: So 4 cell is a little over spec for this revjew. You should also be fine even witht hat 20amp number your getting. Hovered at very low throttle, and smallest stick movement sent it shooting up into the air.
NTM Prop Drive 26-28A 1200kv Motor Review
You need to log-in to comment on articles. On the quad they are amazing, but they are quite power hungry. The 1200kc line these are great little motors, smooth and good build quality. So, I’m planning a quad that will weigh g. You need to log-in to rate articles.
Originally Posted by Noob Mike Failing that, use 8×4. Jul 14, Posting Quick Reply – Please Wait. In my experience, those motors have too high Kv and power for 4S.