Reading The Battery Meter The LED Indicator will start blinking a green heartbeat. Repeat same procedure to return to the charging a Standard Battery position. CPS software download is available for free at www. Multi-channel models can Clone to single-channel radios, but only the first channel is cloned. To comply with FCC requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform FCC transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organiza. You can clone radios using the CPS.

Microphone default setting is set to level 2 medium gain. Turn ON the Target radio and place it into one of 5. Do not expose the charger to rain or snow. Motorola batteries are designed specifically to be used with a Motorola charger and vice versa. Fcc Licensing Information Or: Place the drop-in tray charger on a flat surface. Message nottransmittedMake sure M is completely pressed as you transmit.

Export Law Assurances Verify that the radio is not in Scan. Length of Coverage Ninety 90 days from the date of purchase.

Comments to this Manuals Your Name: Make sure M is completely pressed as you transmit. Limited lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product.

What’s missing? Tell us about it.

Current channel that the radio is using, depending on radio model. Two-Way Radio Operation When using your radio as a traditional two-way radio, hold the radio in a vertical guidee with the microphone two to three inches 5.


The battery can be charged while inside the radio or removed and placed in the Drop- in Charging Tray separately. It’s a community-based project which helps to repair anything. Do not disassemble the charger if it has received a sharp blow, or has beendropped or damaged in any way.

Motorola XTN Series XU user manual – – Solve your problem

Some frequencies have selectable channel spacing, which must match other radios for optimum audio quality. X24Turn radio Off andremove batteries. Set removable bracket for battery type. There is a short delay between when you start talking and the radiotransmits.

Table of Contents Add to my manuals Add. Ensure that the Source radio is in cloning mode. When using your radio while driving, please: Diagram Of Radio And Functions After cloning is completed, the Source radio will 3. Professional digital two-way radio system display mobile pages. Low batteries Extreme operating temperatures affect battery life.

Products or Accessories with a serial numbers or date tags that have been removed, altered or obliterated; b broken seals serie that show evidence of tampering; c mismatched board serial numbers; or d nonconforming or non-Motorola housings, or parts, are excluded form coverage. Zu1100 supply cord of this charger cannot be replaced.

On the Source radio, power the radio following the SUCs. Do not transmit if someone is speaking on the channel. If you hear static, then thechannel is clear to use. Operational WarningsFor Vehicles with an Air BagDo not place a portable radio in the area over an air bag or in the air bag deploymentarea.


Turn OFF the radio. Plug the other end to the second SUC.

Radio display will scrollthrough Channels. Call Tones Call Tones feature allows you to transmit to other radios in your group by alerting them that you are about to talk or alerting them without speaking.

I am trying to enter the Programming Mode but the radio would not do it. Up to 20 Floors Select a channel by rotating the Channel Selector Knob until you reach the desired channel.

Page 55 To Talk These charts are useful when using Motorola X Series two-way radios with other business radios. If plug will not fit the out- let, have proper outlet installed by a qualified electric.

Turn radio Off and remove batteries. The drop-in tray charger’s default position will charge a standard battery. Attaching and Removing Antenna.